| No. | Date | Link/Format | Title | Authors |
| 1 | 2004-06-23 | pdf, doc | The Large Atacama Submm Telescope | Herter et al. |
| 2 | 2005-01-15 | pdf, doc | Segmented Primary Numerology | Herter |
| 3 | 2005-03-13 | pdf, doc | Atacama PWV Distribution | Herter & Radford |
| 4 | | | Atmospheric Transmission | |
| 5 | 2005-05-09 | pdf, doc | CCAT Optical Prescription (spreadsheet) | Herter & Cortes |
| 6 | | | CCAT Sensitivity Document & Spreadsheet | |
| 7 | 2004-08-09 | pdf | Atacama Submm Telescope Design Issues | Woody |
| 8 | 2004-11-23 | pdf, doc | Atacama Submm Telescope Straw-Man Concept | Sebring |
| 9 | 2005-05-10 | pdf | CCAT Survey/Mapping Speed | Herter |
| 10 | 2005-05-09 | pdf, doc | CCAT Optical Performance Requirements | Herter & Cortes |
| 11 | 2005-05-09 | pdf | Position of CCAT Equipment on Cordon Honar Shoulder | Radford |
| 12 | 2005-06-13 | pdf | Sensitivity of Edge Sensors to Zernike Modes | Woody |
| 13 | 2005-07-22 | pdf | Preliminary Geological / Geotechnical Site Assessment - Cordon Honar | Rojas |
| 14 | 2005-08-11 | pdf | Considerations for a Secondary Mirror Nutator | Radford & Cortes |
| 15 | 2005-11-21 | pdf | CCAT pointing: requirements and source densities | Bradford |
| 16 | 2006-01-31 | pdf | Planet observability for submillimeter wavefront sensing | Radford |
| 17 | 2006-03-06 | pdf | Science Requirements and Chopping Secondary for CCAT | Goldsmith |
| 18 | 2006-04-10 | pdf | CCAT Primary Mirror Focal Ratio | Radford et al. |
| 19 | 2006-04-14 | pdf | Environmental Sensitivity of Optical Metrology | Radford |
| 20 | 2006-07-06 | pdf | Surface Maintenance Strategy for Segmented Telescopes Based on Wavefront Optimization | Zmuidzinas |
| 21 | 2007-02-21 | pdf | CCAT - does it need an enclosure? | Sebring et al. |
| 22 | 2007-05-22 | pdf | CCAT acquisition/guider design | Herter |
| 23 | 2007-05-17 | pdf | Rafted panel concept | Woody |
| 24 | 2007-09-06 | pdf | Refractive Pointing Jitter at the Chajnantor Plateau | Radford |
| 25 | 2008-03-07 | pdf | Daytime Observing with CCAT | Radford |
| 26 | 2008-07-23 | pdf | Panel options for large precision radio telescopes | Woody et al. |
| 27 | 2009-02-09 | pdf | Preliminary results from measurement on the JPL Test Panel at the CSO Leighton Telescope | Chamberlin |
| 28 | 2009-05-14 | pdf | CCAT field of view | Padin |
| 29 | 2009-05-18 | pdf | CCAT secondary position errors | Padin |
| 30 | 2009-06-04 | pdf | A direct aperture plane surface alignment technique | Woody |
| 31 | 2009-06-26 | pdf | CCAT panels | Padin |
| 32 | 2009-06-15 | pdf | CCAT primary truss: CFRP or steel? | Padin |
| 33 | 2009-06-27 | pdf | CCAT panel areal density | Padin |
| 34 | 2009-06-27 | pdf | CCAT center of curvature wavefront sensor | Padin |
| 35 | 2009-07-02 | pdf | Applying thermal homology to telescope structure design | Woody |
| 36 | 2009-07-03 | pdf | CCAT seeing | Padin |
| 37 | 2009-07-30 | pdf | CCAT relay optics | Padin |
| 38 | 2009-08-09 | pdf | CCAT dome spillover | Padin |
| 39 | 2009-08-20 | pdf | CCAT surface control - smooth or scalloped? | Padin |
| 40 | 2009-08-21 | pdf | CCAT pointing | Padin |
| 41 | 2009-08-29 | pdf | Conceptual design for the CCAT primary and tipping structure | Woody |
| 42 | 2009-10-07 | pdf | CCAT WFS sensitivity | Padin |
| 43 | 2009-10-11 | pdf | CCAT secondary support | Padin |
| 44 | 2009-08-31 | pdf | CCAT at IR wavelengths | Padin |
| 45 | 2009-12-01 | pdf | Implementation Options for the CCAT Control System | Terrett et al. |
| 46 | 2009-11-11 | pdf | CCAT optics plan | Padin, Radford, Sebring & Woody |
| 47 | 2010-05-20 | pdf | CCAT optical design for 1 degree FOV | Padin |
| 48 | 2011-09-22 | pdf | CCAT requirements | Padin |
| 49 | 2010-05-24 | pdf | CCAT truss requirements | Woody, Padin & Sebring |
| 50 | 2009-07-20 | pdf | Wide FOV mount for CCAT | Sebring & Parshley |
| 51 | 2009-12-02 | pdf | CCAT truss issues | Woody & Padin |
| 52 | 2010-01-28 | pdf | CCAT secondary mirror | Padin |
| 53 | 2010-01-01 | pdf | CCAT panel temperature measurements | Sheng |
| 54 | 2009-09-25 | pdf | Cost of increasing the field of view of CCAT | Padin |
| 55 | 2010-02-01 | pdf | Slewing rings for CCAT elevation bearings | Padin |
| 56 | 2011-06-13 | pdf | Wind on CCAT | Padin |
| 57 | 2012-04-26 | pdf, xlsx | CCAT error budget | Padin & Woody |
| 58 | 2010-03-18 | pdf | Temperature variations in CCAT's steel EL structure | Padin |
| 59 | 2010-03-30 | pdf | CCAT segment actuator requirements | Padin |
| 60 | 2010-04-30 | pdf | Spherical tiles for CCAT | Padin |
| 61 | 2010-05-06 | pdf | CCAT pier requirements | Padin & Sebring |
| 62 | 2010-12-13 | pdf | A stable pointing telescope for CCAT | Padin |
| 63 | 2010-09-07 | pdf | CCAT secondary support | Feeney |
| 64 | 2010-09-07 | pdf, zip | CCAT two lens camera configurations | Feeney |
| 65 | 2010-09-29 | pdf | Invar vs. steel nodes | Woody & Padin |
| 66 | 2010-11-01 | pdf | Thermal model of a CCAT segment | Padin |
| 67 | 2010-11-29 | pdf | An inexpensive enclosure for CCAT | Padin, Woody & Glenn |
| 68 | 2010-12-09 | pdf | Segment changer for CCAT | Padin |
| 69 | 2010-12-15 | pdf | Secondary decenter & tilt sensors for CCAT | Padin |
| 70 | 2011-01-14 | pdf | An SMT like CCAT enclosure | Woody, Padin & Glenn |
| 71 | 2011-05-18 | pdf | Primary mirror subframe support | Kissil |
| 72 | 2011-06-10 | pdf | Earthquakes | Padin |
| 73 | 2011-06-11 | pdf | CCAT segment dimensions | Woody |
| 74 | 2011-06-06 | pdf | Pointing Requirements | Radford |
| 75 | 2011-07-14 | pdf | CCAT wavefront control | Redding et al. |
| 76 | 2011-09-22 | pdf | CCAT tertiary mirror | Padin |
| 77 | 2011-08-30 | txt, zip | Matlab sensitivity calculator for CCAT | Padin |
| 78 | 2011-09-02 | pdf | CCAT secondary support top end geometry | Feeney |
| 79 | 2011-09-28 | pdf | Bending stress in secondary support members | Feeney |
| 80 | 2011-09-07 | pdf | Imaging displacement sensor report | Woody, Redding, Padin & Tong |
| 81 | 2011-09-27 | pdf | Secondary support towers | Feeney |
| 82 | 2011-09-23 | pdf | A tile adjuster concept | Woody |
| 83 | 2011-09-26 | pdf | Wavefront sensor test plan | Wallace |
| 84 | 2011-09-14 | pdf | Using resonant frequency to characterize the quality of a structural design | Woody & Rasmussen |
| 85 | 2011-10-13 | pdf, mpg | Truss optimization | Rasmussen |
| 86 | 2011-11-21 | pdf | Document Standards Plan | Zolkower |
| 87 | 2011-11-11 | pdf | A compact shed enclosure for CCAT | Padin |
| 88 | 2012-01-23 | pdf | CCAT secondary mirror subframe | Padin |
| 89 | 2012-04-10 | pdf | CCAT power requirements | Padin |
| 90 | 2012-01-07 | pdf | Aplanatic Gregory design for CCAT | Padin |
| 91 | 2012-01-07 | pdf | Summary of Tertiary Sub-frame FEA Study | Zolkower |
| 92 | 2012-01-07 | pdf | Truss Construction Tolerances | Woody |
| 93 | 2012-04-02 | pdf | Gregorian secondary details | Padin |
| 94 | 2012-03-20 | pdf | Document Standards Plan - draft | Zolkower |
| 95 | 2012-04-25 | pdf | Primary truss cost vs. performance | Woody |
When uploading a file check the boxes for "Create a link to the attached file" and "Do not show attachment in table" (in other words both boxes should be checked). The link to the file will be in the text after uploading. Edit the table entry to look like the ones already there. Note that "two spaces" before and after a field will center it.
To upload a new version of a file, click the "Attach" link. In the table of uploads at the bottom click the "manage" link for the file you want to replace. The default check box settings should be okay. Simply upload the file to overwrite the old one.
NOTE: Be very careful if you want to delete an attachment. This whole page and all attachments can (too) easily be deleted!
Log In
CCAT Web
Copyright © by the contributing authors. All material on this collaboration platform is the property of the contributing authors.